Water heaters are sold on sticker price and bought on total cost. This adds the installed cost, the energy bill for ten years, and the maintenance each type actually needs — then compares the three options on one line.
A two-person household using about 18 million BTU of hot water a year, gas at $1.10 per therm and electricity at $0.17 per kWh. Installed costs include $150 disposal and $100 permit.
| Type | Installed | Energy / yr | Maintenance | Replacements in 10 yr | 10-year total |
|---|---|---|---|---|---|
| Tank, natural gas | $1,550–$2,650 | $298 | $250 | 0 | $5,333 |
| Tank, electric | $1,350–$2,350 | $975 | $250 | 0 | $11,848 |
| Tankless, natural gas | $2,850–$5,050 | $219 | $2,000 | 0 | $8,145 |
| Heat pump | $3,050–$5,450 | $272 | $600 | 0 | $7,568 |
At exactly ten years nothing needs replacing, so this table is pure install plus running cost. Two results stand out. The electric tank is dramatically the worst — its decent 0.92 UEF is worthless against electricity at $0.17 per kWh, and it costs about double the gas tank over the decade. And the gas tank beats the heat pump here, by roughly $2,200, because gas is cheap enough in this scenario that the heat pump's huge efficiency advantage cannot overcome a $1,500 higher install.
Extend the years field and the ranking changes. Past ten years the gas and electric tanks each need a full replacement while the tankless and heat pump do not, which is what flips the heat pump ahead. That is the single most important sensitivity in this calculator.
Break-even is the year the annual savings catch up with the extra capital cost, before counting replacements.
| Upgrade | Extra capital | Annual saving | Break-even |
|---|---|---|---|
| Gas tank → gas tankless | $1,850 | -$96/yr | no payback |
| Electric tank → heat pump | $2,400 | $668/yr | 4 years |
Read the two rows very differently. The heat pump repays its extra $2,400 in about four years, comfortably inside a 15-year lifespan — a rational buy even with no rebate. The gas tankless row is the one that surprises people: it burns less gas than a tank, saving roughly $79 a year, but it needs $175 more maintenance annually, so the net is a $96 loss every year on top of a higher install price. There is no payback at all here. People buy tankless for unlimited hot water, floor space and a twenty-year service life — all fair reasons, none of them an energy-savings argument.
Uniform Energy Factor is the standard efficiency rating for water heaters. A gas tank at 0.64 means 64 cents of every dollar of gas becomes hot water and the rest goes up the flue or sits in the tank overnight. An electric tank at 0.92 wastes far less per unit of energy, but electricity costs several times more per BTU than gas in most markets — which is why the electric tank still loses on running cost despite the better rating.
A tank water heater lasts about ten years, so any comparison longer than a decade must include buying another one. A tankless unit lasts about twenty and a heat pump about fifteen. This is why the ten-year table can show a cheaper-to-install tank losing overall: it needs replacing exactly at the end of the window.
The ranges here assume a like-for-like swap in the same location. Real jobs often are not: a tankless unit may need a larger gas line and stainless venting, a heat pump needs a condensate drain and often a dedicated 240V circuit, and moving any unit to a different location adds plumbing. These are the line items that turn a $1,300 tank swap into a $3,000 job.
Heat pump water heaters have been among the most heavily subsidised appliances in the US, with utility rebates commonly $300–$1,000 and a federal tax credit covering a further share. At a $1,000 effective rebate the heat pump's break-even against an electric tank drops by roughly four years. Ask your utility before pricing the job.
Step 1 — pick your current type and read its total. That is your baseline, including the replacement you will pay for inside the window.
Step 2 — switch the type and watch the total move. The difference is the number to weigh against incentives and against comfort features like unlimited hot water.
Step 3 — add the extra install work. If a contractor flagged venting, a gas line or an electrical circuit, put it in the extra-install field. It applies to the currently selected type only, so compare it both ways.
Step 4 — stress-test with your own prices. If your electricity is $0.30 per kWh rather than $0.17, the heat pump advantage shrinks. If your gas is $1.80 per therm, the gas tank gets more expensive.
Installed cost ranges reflect typical 2026 US contractor pricing for a like-for-like replacement and exclude any relocation, gas line upsizing, electrical circuits or venting changes unless you enter them. Energy prices vary widely by region and season; substitute your own. Rebates and tax credits are not deducted and can materially change which option wins.